I've tried hooking it up with an 1/8 to 1/4 adapter, but i barely get any noise (i only get some clicks when i touch the mic or so) i can put my electric guitar in the stereo receiver directly (with my mono guitar cable) or using that same adapter (and another adapter xd), and it works either way. Got a tech question for sound & vision email us at [email protected] q is there any way to connect my old technics sh-ge90 equalizer/digital sound processor to my new onkyo tx- nr838 receiver the technics is capable of signal manipulation, but what i really miss is the graphic display of audio waveforms on its front panel. I have a denon avr-590 av surround receiver and have my ps3 connected to it i like accessing the internet such as youtube through this for karaoke clips and would like to connect a microphone to t. Good stuff thank you well what i am trying to do is hook all this up to a reciever at my house so i can do karaoke its a harmon/kardon and you can only use one source at a timeso i have an adapter coming in tomorrow to make the video out on the computer to go to an hdmi that will go directly to the tv. When setting up wireless microphone systems each microphone that will be in use will need a dedicated receiver (ie: one microphone to one receiver) both the microphone and the receiver must be on the same frequency in order to interact with each other.
The microphone comes in two parts the first component is the headpiece and the second is the adapter that plugs into the computer the adapter can either be a usb port or a plug both types of devices work the same way the adapter picks up the sounds and sends them to the computer. Connect the microphone’s receiver to the mixer mic input using a male to male 1/4 audio cable that might be included in your mic set 3 connect the mixer’s rca output to your surround sound amp’s rca input using the provided rca audio cable as part of the mixer set. Microphones only supply mic level there is about a 50-60 db difference between these two levels to plug a microphone into a home stereo receiver you need to connect the microphone to either a microphone preamplifier or a mixer a mixer has multiple microphone preamps in it and is usually easier to find than just a preamp. Hi all, i am a bit to to receivers i have my media pc connected to an onkyo receiver (71 sound model) via optical cable i want to hook up karaoke to the receiver as well via rca.
Hooking up your new karaoke machine is a very simple undertaking, particularly if you're armed with the right set of instructions to make sure all parts of your entertainment system are properly connected, read on the learn everything you'll need to know. I just purchased a wireless microphone receiver that uses 1/4 inch output and i need to run it to a mixer that has stereo (red/white) inputs what is the best way to hook this up so that 1. A wireless receiver can only demodulate the signal from one active mic-transmitter at a time but you may use one transmitter or the other, as long as only one transmitter is powered up at any time operating two wireless mic-transmitters on the same frequency simultaneously is the same as having two fm radio stations transmitting on the same frequency. First, let's describe what auto setup systems do they send test tones to all the speakers and subwoofer, and use a microphone to pick up the sound of the speakers in your room. Wireless microphone systems range from simple to sophisticated but they all include various combinations of these key components: • transmitters: convert the audio signal from the microphone to a radio signal there are two types: handheld microphone transmitter – combines handheld microphone element and transmitter in one unit.
Step 1: hook it up install the batteries in the microphone checking to make sure they are inserted properly if the adapter needs batteries, be sure to install them before plugging it into the computer. This feature is not available right now please try again later. Typically you'd get a separate karaoke machine for this which will have your microphone effects, separate volume controls, and ability to hook up multiple microphones, then hook this into your onkyo, then from your onkyo to your speakers + tv. How to install a wireless microphone to my home theater system discussion in 'beginners, general questions' started by harpies, jul 20, 2009.
Most receivers come with auto-calibration systems you can use to fine-tune the sound to account for the size of your speakers and the room they’re in plug the included setup microphone into the dedicated jack on the front of the receiver, and place the microphone where you’ll sit most of the time. How to connect a microphone to a pc computer or laptop and start making audio recordings is one of your most frequently asked questions nearly all computers have a mic port (nowadays often combined with a headphone port), so it should be possible to directly connect a dynamic mic if you have the appropriate jack for the socket. 1 usb microphones the audio technica at2020usb+ click to buy from amazon a really neat one-stop solution for recording on your computer, and one which will offer a considerable improvement in quality over a generic computer microphone and sound card combination, is to consider a usb mic. You can do this, but you will want to purchase a mic to line level preamp, or a microphone which has a line level output you will also want to split the microphone so that it hits the left and right channel at once.
If you want to upgrade your computer's audio inputs with an external microphone, either for chatting or to do some home recording, you can learn to hook up your new set-up, whether you've got basic computer microphones or more professional xlr-type mics. Current set up is dvd player is connected to receiver through optical, video outputs to tv we get surround sound from the dvd player ok, but when we try to use the microphone input on the dvd player, the sound is very muted coming out of the speakers. Hot plugging while p48 is already activated can harm your mics also, never put anything between your mic and your microphone input any device in-between will likely block phantom power and/or degrade the sound quality also, puttting mic inputs on a patchbay is not recommended always connect your mic directly to the xlr mic input. Insert the leave-in nano receiver into a usb port and move freely around home or office, up to 33 feet (10 m) away from your computer enjoy up to six hours of wireless audio with the rechargeable battery.